Dealing With the Double-Action Trigger

The double-action handgun, whether revolver or autoloader, is a great threat management tool. The long, heavy trigger means that accidental discharges under stress are less likely to occur than with a light, short action.

What happens, though, when shooting has to be done? The trigger that requires deliberate action to fire also requires more attention to get good hits when shooting is needed. If that’s the case, what’s the best way to handle the double-action trigger in a self-defense situation?

Trigger Control Is Everything

Over the years, I’ve come to realize that it’s not about the sight picture. Everyone knows what a proper sight picture looks like, and it’s an easy thing to teach to even complete novices. What’s harder is to keep those sights—and the bore of the gun—on target as the round is ignited.

“Focus on the front sight” works not because we lack knowledge of the sight picture, but because the subtle visual cues in that view tell us when our trigger finger is steering the gun off of proper alignment. That allows us to re-establish that alignment on a continuous basis until the round ignites.

That’s great for target shooters, but as we start to focus on the threat, those visual cues disappear. We need to be able to shoot without our finger affecting the gun’s alignment, and it’s harder to do with a double action than a single action.

Not impossible, though!

What To Do With That Finger?

In order to manipulate that heavy action, we need optimal finger placement on the trigger, and that is at the first joint, known in anatomy as the distal interphalangeal joint and usually abbreviated as DIP.

By centering that joint on the trigger face, we get maximum leverage with minimum effort. The finger doesn’t tire as quickly, and the finger movement is smoother. Using the DIP allows us to manipulate the trigger with as little imparted motion to the gun as possible.

Start With the Basics

When I talk about double-action trigger manipulation, I like to use the term stroke—as in a golf stroke. I use this term intentionally and in preference to other terms, because it puts the correct picture in the mind (you’ll see why later).

A trigger stroke, like a golf stroke, consists of two parts: the first is the trigger compression, which fires the gun. The second is the trigger return, which resets the trigger for the next shot.

Once upon a time, double-action shooters were taught to stage the trigger—that is, to pull it back partway, stop, readjust the sights, then restart the trigger to fire the gun. We now realize that this is not practical in the midst of a defensive encounter, and that training in a manner that is not consistent with reality results in lowered performance.

Instead, we train so that the compression is of a consistent speed. Don’t stop or even slow down once the compression has started: keep the trigger finger moving until the gun fires.

Proper trigger control results in better double-action shooting at any speed or distance.

Proper trigger control results in better double-action shooting at any speed or distance.

As I mentioned, compression is only one-half of the trigger stroke. The other half is the return, and it is just as important as the compression. In fact, Jerry Miculek, the world-famous revolver shooter, once said that the return is MORE than half of the trigger stroke!

The goal of a good trigger return is to set us up for the next shot as efficiently as possible. The return should be as smooth as the stroke, and at the same speed as the stroke.

Once the trigger starts moving, it doesn’t stop. The compression/release sequence should not have any interruptions or slow spots. It should feel as though it is one continuous motion—just like a golf swing!

Finally, a Use for That Geometry You Learned in High School!

It’s important to understand that the double-action trigger and your finger are somewhat at odds. The trigger rotates on a pivot and travels not in a straight line, but in an arc. Your finger does the same thing: it pivots at the second finger joint and the tip travels in an arc.

Those arcs are at right angles to each other. The trigger’s arc is in a vertical plane, and the finger’s is in a horizontal plane. What this means is that the trigger, relative to the finger, is rotating away from it. The finger, relative to the gun, is rotating toward it.

Why is this significant? Because it sets the stage for the biggest mistake most people make when shooting double action: milking the trigger.

Grasping or

Grasping or “milking” the trigger brings the fingertip into contact with the frame, possibly throwing shots off target.

As the trigger rotates away from the trigger finger, most people feel a loss of control, as if they don’t have a good hold on the gun. The trigger finger is sliding down and sideways on the face of the trigger, and the natural reaction is to curl the tip of the finger inward, as if preventing the trigger from getting away, or keeping the finger from sliding off.

When this happens, the trigger finger steers the gun to one side. For a right-handed shooter, it usually results in the gun being pulled over to the right as the finger’s arc comes inward, toward the palm, as the sear releases. (This is why I don’t use the term “trigger pull.” The last thing we want to do is pull the gun more!)

Most people see this happening because their sight alignment suffers as the trigger finger steers the gun slightly off target. The usual reaction is to curl the finger so much that the tip contacts the frame, pushing the gun in the opposite direction. Consciously or not, the shooter is trying to equalize the two forces to keep the gun squarely on target.

Getting both of those forces just right on the target range, when you can clearly watch your sights, is easy. Doing it in the face of a determined attack, perhaps in sub-optimal light, is another matter.

Training The Trigger Finger

The solution is to stop the trigger finger from steering the gun in the first place. How do we do that? Believe it or not, it’s pretty simple, but it takes a little conscious effort to retrain the brain.

The key is to let the trigger finger slide across the trigger face. Now that sounds simple enough, but it’s tough to do—at first. It gets easier after just a little dry-fire work.

As the trigger moves backward in compression, pay attention to the way the finger wants to slide. It will want to slide down the trigger face. Let it. It will want to slide sideways, across the trigger face. Again, let it do so.

You may feel as though your finger is going to slide right off the trigger, but it won’t! Compress the trigger, letting the finger slide down and across the trigger face. Pay attention to how it feels, and replicate that feeling with each repetition.

Letting the finger slide over the face of the trigger eliminates both

Letting the finger slide over the face of the trigger eliminates both “steering” and frame interference.

After you do this consciously a few times, you’ll discover that the tip of your finger is no longer curling in and touching the frame. You should also notice that your sights are staying locked in alignment on the target. This is because the trigger is now coming straight back and not being steered in any direction.

Do the same thing on the release stroke. Let the finger slide over the trigger as it smoothly resets. The return should be at the same speed as the compression. Watch your sights and do just enough repetition so that your sights don’t move during the return.

The result? Your sights shouldn’t move at all during the complete trigger stroke, either in compression or return. That’s when you know you’ve got it!

How much dry fire is necessary? Not a lot—most people pick this up in just a minute or two. Once you’ve gotten to the point that the trigger is moving without disturbing the sight alignment, any further dry fire is of little use. It’s time to go to the range and do it for real!

By letting the trigger finger move as it needs to over the trigger face, you’ll find that your double-action shooting will become faster and more accurate. Most importantly, it will be so whether you’re carefully watching your sights or not!

Share tips, start a discussion or ask one of our experts or other students a question.

Make a comment:
500 characters remaining

24 Responses to “Dealing With the Double-Action Trigger”

  1. Patricia Compton

    SINCE I'M A VISUAL LEARNER READING THIS IS LIKE A FOREIGN LANGUAGE. I NEED A VIDEO

  2. brenna

    Hello All Thanks for checking out my academic writing page . My name is Brenna Talbot. I have worked several years in this niche. My aptitude for writing started at a young age. I wrote poetry as a child and eventually went on to work with my school newspaper. This early tryst into journalism eventually led me to academic writing. There is plenty of work for qualified writers. I specialize in dissertations , but have the skills to do all types of academic writing. Reach out for more information about rates and a price quote. I’m looking forward to helping you. Academic Writer – Brenna Talbot – <a href="https://www.moreton-in-marsh.info/" / rel="nofollow ugc">www.moreton-in-marsh.info</a>Confederation

  3. nannie

    Welcome Everyone Thanks for checking out my academic writing page . My name is Nannie. I have worked several years in this niche. My interest in writing started at a young age. I wrote journaled as a child and eventually went on to work with my school newspaper. This early tryst into news reporting eventually led me to academic writing. There is plenty of work for professional writers. I specialize in research papers , but have the skills to do all types of academic writing. Contact me for more information about rates and a price quote. I’m looking forward to helping you. Academic Writer – Nannie Morris – <a href="https://elearninag.com/" / rel="nofollow ugc">elearninag.com</a> Team

  4. phil flack

    Some of the worst advice i gave ever seen in print.

  5. Eric Phillips

    I’ve heard this before, and it may work well for some. I’ve found that for myself, keeping the meaty part of my index finger on the trigger and pulling in a straight line seems to keep the front sight on target without any thought at all. I’m not as fast as some, but I generally hit dead center.

  6. Ham

    This was really, really helpful reading!

  7. Leroy Small

    suffice it to say,,,, as a former Marine rifle/pistol range instructor and avtd shooter have never read a simpler explanation on the double action instruction as I just read...thank you

  8. Erwin Tester

    Why not shoot as a single action and cock the hammer first?

  9. bill burnett

    I am retired LEO. Excellent and thorough description of sight on target while applying pressure to trigger. A big problem I saw with "new" shooters and recruits was "recoil anticipation". Enjoyed reading this and be safe.

  10. DJUUDDKFESRITRP

    Thanks for another informative site. Where else could I get that type of information written in such a perfect way? I have a project that I'm just now working on, and I have been on the look out for such info.