Decocker 101

Although recent trends in the law enforcement and commercial markets have favored striker-fired semi-automatic pistols for home and holster, the more traditional double-action semi-auto retains a strong presence.

Ruger P95

Look closely: this Ruger P95 is out of battery due to the slide going forward with the decocking safety deployed.

Many of these guns utilize a mechanical system to return a cocked single-action hammer to the resting double-action position. Commonly called a “decocking lever,” this device allows the shooter to replace the shorter, lighter single-action trigger pull with the longer, heavier double-action setting. The trigger in double-action mode is (in theory) more forgiving of unintended finger pressure and thereby less likely to produce an accidental discharge.

decocking a safety

Decocker-equipped pistols are found worldwide in police and security service. The current standard issue and substitute standard pistols of the U.S. armed forces are double-actions with decockers, and they have long been popular with civilian users as well. In training with such pistols, the realities imposed by the decocker must be recognized and accommodated.

decocking a gun's safety

With normal firing grip, shooter is unable to reach decocking safety.

The exact function of the decocking mechanism has to be of primary concern, because not all decockers are created equal. They will largely fall into one of two categories: decocking levers and decocking safeties. A decocking lever acts as described above, while a decocking safety will combine the functions of both the decocker and a manual safety. The difference is obvious and vital: Is the pistol ready to fire after decocking or Is the safety engaged after decocking? It takes little imagination to appreciate the potential for disaster if the user isn’t fully familiar with the system at hand.

In many cases, a pistol manufacturer will offer a variety of systems available on the same platform. For example, a Beretta model 96G (decock only) looks almost exactly like a model 96FS (decocking safety) and it takes more than a casual examination to note the huge difference between the two. This is also the case with the well-regarded Smith & Wesson third-generation family of pistols. The Ruger P-series guns use a different shaped lever to help distinguish the two systems more readily.


become a member

decocking the safety

Shooter’s hand must crawl out of firing position so that thumb can operate decocking safety.

Manipulation of the decocking device becomes the next consideration, and the location of the lever will influence the chosen method. On most pistols, the decocking device will be in one of two areas: on the slide or on the frame. In either case, the important factor is the shooter’s ability to reach and use the lever. With the more common slide-mounted lever, most shooters will have to significantly alter or even break their normal firing grip to operate the device. For many, the needed leverage can only be gained by turning the pistol in the hand. This is undesirable from a training perspective, to say nothing of most safe gun handling considerations.

decocking the safety

Support hand approaches and operates decocking safety, then moves into two-handed grip.

A much better option in this case may be to use the support hand to operate the decocker. As the support hand moves to join the firing hand in a proper two-handed grip, it can reach and deploy a slide-mounted device of virtually any design. The aforementioned Beretta and Smith & Wesson pistols work well this way because their levers rotate downward to decock, then must go back upward to the “FIRE” position.

Ruger P95 and Beretta 92FS with slide-mounted decocking safeties.

Ruger P95 and Beretta 92FS with slide-mounted decocking safeties.

Slide-mounted decocking safeties can pose another potential problem. For reliable function, every semi-automatic pistol slide needs to slam home with all the force that its recoil spring can provide. It is well established that anything that impairs this slide movement can cause a malfunction by not fully seating a round of ammunition in the chamber. If a slide-mounted decocking safety is deployed in the downward “SAFE” position before the slide is fully closed, it can impede the slide’s movement. This problem is most visible with inexperienced users to whom chambering a round with the “safety” turned off seems counterintuitive. Understanding the system and training to support it will help keep “out of battery” experiences to a minimum.


become a member

HK (top) and SIG Sauer pistols with frame-mounted decocking levers.

HK (top) and SIG Sauer pistols with frame-mounted decocking levers.

Frame-mounted decockers, such as those found on the classic SIG Sauer pistols or some Heckler & Koch models, can be easier to deploy because they tend to be located near the shooter’s thumb. It is, however, a function of the size and shape of the user’s hand that dictates if a firing grip can be maintained while using the decocking device. Once again, there can be an advantage to training the support hand to reach what the firing hand cannot.

Frame-mounted decocker

Frame-mounted decocker is placed within easy reach of shooter’s thumb.

Although not exclusive to decocking devices, shooters and instructors must emphasize consistency in their training. Once a safe and efficient technique is identified, it needs to be imprinted through repetition. In short, if you decock your pistol and choose to leave the safety engaged, fine. Always do it that way. Under stress and in imperfect conditions, you are far more likely to find your pistol in the condition of readiness that you expect if you have trained consistently in that manner. The difference between success or failure, on the range or on the battlefield, is a function of the quality of our training and not the particulars of our equipment.

Share tips, start a discussion or ask one of our experts or other students a question.

Make a comment:
characters remaining

15 Responses to “Decocker 101”

  1. Tyler oliphant

    The decocker are away of looking for trouble. They don’t work like they should. It’s fallty and you can hurt your self if it does fire. It’s a safety where if you pull the trigger nothing happen. It blocks the hammer locking pin for moving and keeps so when you move the tigger locking pin to the moves it out. And so when you pull the tigger nothing happens. That’s how it’s suppose to be done.

  2. Venus

    This is the perfect blog for everyone who hopes to find out about this topic. You know so much its almost hard to argue with you (not that I actually would want to

  3. Chelsea

    When was the de-cocking lever invented and by whom?

  4. pandora charms

    It truly is a classic nice and helpful piece of information and facts. I'm just content which you embraced this useful details around. Be sure to remain people up-to-date similar to this. Appreciate your discussing.

  5. Chris Reerman

    Sig Sauer P 226 X-Five Allround 9mm luger, is perfect for me, I'm a southpaw

  6. andy loeffler

    Thanks for reading the article, Chris and Camsdaddy- I feel very strongly that you must understand the equipment and its features. The Dexx/Safety on your 3913 gives you an option of manual safety, if you want it. I too have always felt that the long D.A. trigger was safety enough to keep me out of trouble.

  7. Camsdaddy

    I have had a 3913tsw since the early 90's. This was my first handgun purchase and my only handgun for years. I always practices sweeping the lever up as I would draw. I have in the past few years disregarded the lever all together except to dexxxx once a round is loaded in the chamber. At that time I rotate the dexxxxer and carry the gun in that condition. I am quite comfortable relying on the DA trigger pull as a safety.

  8. Chris Reerman

    Very GOOD info, thanks

  9. Andy Loeffler

    Thanks, MichaelH- I agree! Knowing how to use what you've got is better than wishing that it was something else.

  10. MichaelH

    Glad that this info was very friendly for the reader to understand, and without saying that unless you shoot a Glock your using the wrong firearm, great info which ever firearm you have shoot it, train with it, and Know how to deploy it when you need it. And that includes drawing the weapon and know shoot / dont shoot, thanks for all the great info and helping keep people educated.